For more information visit:
www.EatonElectrical.com
EZD Settings
MN05013005E
380
The first screen display is the selection of the marker range.
X
ÍÚ
Select a range.
X
Press
OK
to access the Entry modes.
–
ú í
Select a position from/to,
–
ÍÚ
Set a value.
X
Save the input from .. to .. with
OK
.
Press
ESC
to exit the input for the retentive ranges.
Up to six different ranges can be selected.
Example:
MB 01 to MB 04, C 12 to C 16, DB 01 to DB 16, T 26 to T 32
should be retentive.
124 bytes have been assigned to the retentive data range.
76 bytes are still available.
Deleting ranges
Set the ranges to be erased to the values from 00 to 00.
e.g.:
MB 00 -> MB 00
. The markers are no longer
retentive.
Deleting retentive actual values of markers and function
blocks
The retentive actual values are cleared if the following is
fulfilled (applies only in STOP mode):
MB 00 -> MB 00 Æ
C 00
-> C
00
CH 00 -> CH 00 æ
B:200
CI 00 -> CI 00 Æ
DB 00 -> DB 00
T 00 -> T 00 æ
B:200
J
The display on the lower right
B:200
indicates the number
of free bytes.
MB 01 -> MB 04
C 12 -> C 16
CH 00 -> CH 00
CI 00 -> CI 00
DB 01 -> DB 16
T 26 -> T 32
B:076
