For more information visit:
www.EatonElectrical.com
EZD Settings
MN05013005E
370
Activating input delay
(debounce)
Input signals can be evaluated by EZD with a debounce delay.
This enables, for example, the trouble-free evaluation of
switches and pushbutton actuators subject to contact bounce.
In many applications, however, very short input signals have
to be monitored. In this case, the debounce function can be
switched off.
X
Press
DEL
and
ALT
to call up the System menu.
X
Select the SYSTEM menu.
The input delay (debounce) is set with the DEBOUNCE menu
item.
Activating debounce
If a tick
å
is set beside
DEBOUNCE
, the input delay is set.
If this is not so, proceed as follows:
X
Select
DEBOUNCE
and press
OK.
Debounce mode will be activated and the display will show
DEBOUNCE å
.
Press
ESC
to return to the Status display.
Deactivating debounce (input delay)
If EZD is showing
DEBOUNCE
in the display, this means that
Debounce mode has already been deactivated.
X
Otherwise select
DEBOUNCE å
and press
OK.
Debounce mode will be deactivated and the display will show
DEBOUNCE
.
J
If EZD is password-protected you cannot open the System
menu until you have “unlocked” it.
DEBOUNCE å
Æ
P BUTTONS
RUN MODE
CARD MODE
æ
DEBOUNCE å
Æ
P BUTTONS
RUN MODE
CARD MODE
æ
