For more information visit:
www.EatonElectrical.com
EZD Settings
MN05013005E
366
X
Select the required function block with
Í
or
Ú
.
X
Press the
OK
button.
X
Scroll with the
Í
or
Ú
cursor buttons through the constants
of the function block inputs.
X
Change the values for a parameter set:
– With
OK
in the Entry mode,
–
ú í
change decimal place,
–
ÍÚ
change the value of a decimal place,
–
OK
save constants or
–
ESC
Retain previous setting.
Press
ESC
to leave the parameter display.
Adjustable parameters for function blocks
You can modify the function blocks used in the circuit diagram
in three different ways:
• All circuit diagram parameters can be adjusted in STOP
mode via the function block editor.
• Setpoints (constants) can be modified in RUN mode via the
function block editor.
• Setpoints (constants) can be modified via the
PARAMETERS menu.
Adjustable setpoint values are:
• The inputs with all function blocks if constants have been
used.
• Switch on and off times with time switches.
In RUN mode EZD operates with a new setpoint as soon as it
has been modified in the parameter display and saved with
OK
.
T 03 Ü S
+
>I1 020.030
>I3 005.000
QV> 012.050
J
Only constants on the function block inputs can be
changed.
