Working with contacts and relays
For more information visit:
www.EatonElectrical.com
MN05013005E
143
The device will search for the first occurrence of the contact or
coil from the start of the search to the end of the circuit
diagram. If no contact or coil is found, the EZD circuit diagram
editor will continue the search from the start of the circuit
diagram. If a contact or coil is found, the EZD editor
automatically jumps to the respective field in the circuit
diagram.
“Go to” a rung
The EZD circuit diagram editor provides a Go To function in
order to enable fast access to a rung.
X
Press
ESC
and use the
ÍÚ
cursor buttons to select the GO
TO menu.
X
Press
OK
.
X
Select the required rung (L...
…
) with the
ÍÚ
cursor
buttons.
The first contact on the rung is always indicated.
X
Press
OK
.
The cursor remains stationary at the required rung contact
L 1.
Deleting the rung
EZD only removes empty rungs (without contacts or coils).
X
Delete all the contacts and coils from the rung.
X
Position the cursor on the first contact field of the empty
rung.
X
Press
DEL
.
The subsequent rung(s) will be “pulled up” and any existing
links between rungs will be retained.
I 01----I 02---
Q 01----HY01Q1k
L: 1
C:1
B:7140
I 01----I 02---
Q 01----HY01Q1k
L:
1
C:1 B:7140
I
01----I 02---
Q 01----HY01Q1k
L: 1
C:1
B:7140
