background image

Eaton

1121 Highway 74 South

Peachtree City, GA 30269

P: 770-486-4800

www.eaton.com/lighting

Canada Sales 

5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172

© 2016 Eaton

All Rights Reserved

Printed in USA

Imprimé aux États-Unis

Impreso en los EE. UU.

Publication No. IB528001EN

October 12, 2016

Eaton is a registered trademark.

All trademarks are property  

of their respective owners.

Eaton est une marque de commerce

déposée. Toutes les autres marques 

de commerce sont la propriété de leur 

propriétaire respectif.

Eaton es una marca comercial

registrada. Todas las marcas 

comerciales son propiedad de sus 

respectivos propietarios.

Product availability, specifications,  

and compliances are subject to  

change without notice

La disponibilité du produit, les 

spécifications et les conformités  

peuvent être modifiées sans préavis

La disponibilidad de productos, las 

especificaciones y los cumplimientos 

están sujetos a cambio sin previo aviso

Warranties and Limitation of Liability

Please refer to 

www.eaton.com/LightingWarrantyTerms

 for our terms and conditions. 

Garanties et limitation de responsabilité

Veuillez consulter le site 

www.eaton.com/LightingWarrantyTerms

 pour obtenir les conditions générales. 

Garantías y Limitación de Responsabilidad

Visite 

www.eaton.com/LightingWarrantyTerms

 para conocer nuestros términos y condiciones. 

Summary of Contents for ephesus Arena Series

















Reviews: