Eaton eNMC2, User Manual, Page: 38 / 231

Controls
Contextual help of the web interface – 38
•
•
•
•
•
3.4.2.3 Pending action
Displays the delay before shutdown and delay before startup.
3.4.3 Scheduled shutdown
Use Scheduled shutdowns to turn off either the UPS or individual load segments at a specific day and time.
This feature is used for saving energy by turning off equipment outside of office hours or to enhance cybersecurity by powering
down network equipment.
If server shutdown scenarios are defined for any of the connected servers or appliances, they will be triggered before the
corresponding outlets are turned off as configured in shutdown settings.
3.4.3.1 Scheduled shutdown table
The table displays the scheduled shutdowns and includes the following details:
Recurrence – Once/Every day/Every week
Load segment – Primary/Group 1/Group 2
Shutdown time – Date/Time
Restart time – Date/Time
Active – Yes/No
3.4.3.2 Actions
3.4.3.2.1 New
Press the New button to create a scheduled shutdown.
3.4.3.2.2 Delete
Select a schedule shutdown and press the Delete button to delete the scheduled shutdown.
3.4.3.2.3 Edit
Press the pen icon to edit schedule shutdown and to access the settings:
3.4.3.3 Access rights per profiles
Administrator Operator Viewer
Protection/Scheduled
shutdowns