EMR-4000
IM02602009E
Special Parameters of the Waveform Recorder
Value
Description
Default
Size
Menu path
Rec state
Recording state
Ready
Ready,
Recording,
Writing file,
Trigger Blo
[Operation
/Status Display
/Recorders
/Waveform rec]
Error code
Error code
OK
OK,
Write err,
Clear fail,
Calculation err,
File not found,
Auto overwriting
off
[Operation
/Status Display
/Recorders
/Waveform rec]
Fault Recorder
Fault rec
Purpose of the Fault recorder
The
Fault Recorder
provides compressed information about faults (e.g. Trip Causes). The compressed information can
be read out also at the HMI. This might be helpful for fast fault analysis already at the HMI. After a fault, a popup
window will be sent onto the display in order to draw the users attention to the fault. The
Fault Recorder
will provide
information on the causes of the fault. A detailed fault analysis (in oscillographic form) can be done means of the
Waveform Recorder. The reference between the Fault Records and the corresponding Waveform (Disturbance)
Records are the »
Fault Number«
and the »
Grid Fault Number«
.
www.eaton.com
193