EDR-5000
IM02602007E
Switching the Breaker at the Panel
Manually switching a switchgear at the device panel is possible at the following switching authorities:
Local
Local and Remote
Assumed the device displays the main screen:
1.
Press the »
Menu«
softkey.
2.
Select the »
Control«
menu by using the »
up«
or »
down«
softkeys and press the »
right«
arrow softkey button.
3.
Select the »
Control«
menu by using the »
up«
or »
down«
softkeys and press the »
right«
arrow softkey button.
4. A symbol for the switchgear and its status (ON, OFF, intermediate or disturbed) is displayed.
5. Dependent on the status (ON/OFF), the switchgear can be switched ON or OFF by the corresponding softkey.
The current position of the switchgear will be visualized by different symbols:
Breaker State
Symbol
0
(Intermediate)
1
(OFF)
2
(ON)
3
(Disturbed)
www.eaton.com
412