EC500 Controller Handbook
Copyright © 2019 Eaton Corporation. All Rights Reserved.
Issue A March 2019
Page 82 of 107
➢
To view the MAC Address of the EC500
Either:
•
On the EC500 keypad select: Home
Menu
Settings
Communication Settings
Ethernet
MAC
•
Confirm the action to reset current share factor.
Or:
•
Connect to the EC500 via a web browser (See Ethernet Communications on page 79).
•
Go to Home
Settings
Communication Settings
Ethernet
MAC
The following methods can be used for communications over the Ethernet interface:
COMMUNICATION VIA WEB BROWSER
The EC500 controller has an in-built web server. This allows a PC/laptop with a standard web browser to
control and monitor the EC500 via an IP network.
➢
To connect to the EC500 with web browser
•
Set up Ethernet communications and connect the EC500 to the IP network. See Ethernet
Communications on page 79.
•
Open a web browser window.
Recommended web browsers: Microsoft Internet Explorer 10 or later, Mozilla Firefox 3.0 or
later, Chrome V63 or later.
Internet Explorer 10/11: Ensure that Compatibility Mode is turned off. Go to Tools >
Compatibility View Settings.
•
Type the IP Address of the EC500 into the address bar of the browser.
If HTTPS Access has been enabled and you wish to use secure web communication then type
"https://" before the IP Address.
•
The EC500 web server Log On page will appear.
•
Type your Username and Password. Click
Sign In
. The EC500 web system page will be
displayed.
EC500 in-built Web server uses default port 80.
