Eaton easySafety, Manual

Page: 319 / 695

T, timing relay
315
02/16 MN05013001Z EN
T, timing relay A timing relay is used to change the switching duration and
the make and break times of a switching contact in the
standard circuit diagram. The delay times can be configured
between 50 ms and 99 h 59 min.
easySafety allows the use of up to 16 non-safety timing
relays.
Function block
Figure 152: Timing relay function block
a Coil T..EN: Enables the operation of the function block.
b Coil T..RE: Resets the timing relay to zero.
c Coil T..ST: Stops the timing relay.
d Input T..I1: Entry for setpoint 1.
e Input T..I2: Entry for setpoint 2.
h If you require a timing relay in the safety circuit diagram,
use the 16 safety timing relays provided there with a
similar function.
h page 337 on Example with timing relay and counter
function block provides information on the timing relay
and counter function block.
EN
RE
ST
>I1
Q1
QV>
T...
Timed relay
>I2 DW
DW
a
b
c
d
e
f
g