Eaton easySafety, Manual

Page: 144 / 695

Wiring with ea s ySafety
140
02/16 MN05013001Z EN
Aborting circuit diagram entry
X
Press ESC to leave the circuit diagram entry without
saving.
X
Use the cursor buttons
ÍÚ
to select the CANCEL menu.
X
Press OK.
The circuit diagram is closed without saving.
Searching for contacts and coils
Boolean operands or function blocks that are wired as
contacts or coils can be found in the following way:
X
Press ESC. Use the cursor buttons
ÍÚ
to enter the
SEARCH menu.
X
Press OK.
X
Use the cursor buttons
Ú
and
ú í
to select a contact or coil
as well as the required number.
For a function block you select the function block name and
the number.
X
Confirm the search with the OK button.
The search starts at the point where the search is activated,
continues to the end of the circuit diagram, and, if necessary,
from the start of the circuit diagram if the required contact
or the coil is not found. If the search is successful, you will
automatically reach the required contact or coil field in the
circuit diagram.
IS01----IS02--
u
QS01----HY01Q1
k
Æ
CANCEL
æ
IS01----IS02--
u
QS01----HY01Q1
k
Æ
SEARCH
æ
IS01----IS02--
u
QS01----HY01Q1
k
SEARCH IS0 1
IS01----IS02--
u
QS01----HY01Q1
k
L: 1 C:1 B:7140