
2 Installation
2.8 Connecting the serial interface
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
63
2.8.3 Connecting for point-to-point communication
Connect a connection cable from the MFD device to the serial interface of
the easy800 device.
Table 5: Prefabricated connection cables for point-to-point communication
Connecting example
800 standard to MFD-…-CP8/CP10
Figure 61:Fitting/removing the interface cover
▶
Remove the cover from the serial interface and connect the connector
plug of the MFD-800-CAB5.
Device
Connection cable
Device
Baud Rate
easy800 standard
MFD-CP4-800-CAB5
EASY209-SE
up to 57.6 KBaud
MFD-CP4
up to 19.2 KBaud
MFD-800-CAB5
MFD-CP8
MFD-CP10
up to 19.2 KBaud
easy800-SWD
EU4A-RJ45-CAB2
MFD-CP4
up to 19.2 KBaud
EASY209-SE
up to 57.6 KBaud
→
In order ensure compliance with EMC requirements, the
MFD-800-CAB5 cable must not be lengthened.