2 Installation
2.6 Connecting outputs
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
51
Connect the analog output of
800 standard
Connecting solenoid valve
Figure 52:Connecting a solenoid valve; the 0V terminals are connected inside the device.
Setpoint entry for a drive
Figure 53:Setpoint entry for a drive; the 0V terminals are connected inside the device.
Connecting the analog output of the EASY4..-DC-ME expansion units
Analog expansion units are used to increase the number of outputs.
The EASY406-DC-ME analog expansion unit offers you one and the
EASY411-DC-ME two additional analog outputs. Both devices provide a
DC voltage of 0 - 10 V with a 10-bit resolution and 0 - 1023 value range.
Connect the actuator(s) to QA1(/QA2) and to the relevant 0 V terminal to its
(their) left.
0 V
0 V
24 V
H
...V
L01 –
F1
L01 +
I1
I2
I11
I12
0 V
QA1
0 V
0 V
24 V
H
24 V
L01 –
F1
L01 +
I1
I2
I11
I12
0 V
QA1
0 V IA
