9 Inside 800
9.7 Monitoring the serial interface
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
327
9.7 Monitoring the serial interface
The device runs a baud rate dependent timeout monitoring of the
communication via the serial multi-function interface. If a data exchange in
progress is interrupted for the set timeout time, the easy800 device discards
the data received up to this time and waits for a new start telegram.
9.8 Displaying device information
The device information is provided for service tasks or in order to determine
the performance level of the device.
This function is only available with devices featuring a display.
▶
Switch to the main menu and use the cursor button
Í
or
Ú
to move to the
INFORMATION menu.
▶
Press OK.
This will display all device information:
Line 1:
•
DC/AC
•
AC (AC voltage)
•
or DC (DC voltage).
•
TCA-/RC
•
T: Transistor output,
•
or R: Relay output,
•
C: Real-time clock provided,
•
A: Analog output provided.
•
LCD/---
•
Display present/not present. This information can only be displayed
by a locally connected MFD-CP4/-CP8 device in Terminal mode. If the
remote device is run without a display, the MFD-CP4/-CP8 shows the
dashes --- at this position.
•
NET/---
•
easyNET connection present/not present.
Line 2:
•
OS: e. g. 1.12.204, operating system version.
Baud rate [Kbaud]
Timeout time [ms]
9.6
4000
19.2
3200
38.4
2400
57.6
2000
STOP
å
RUN
Æ
PARAMETER
SET CLOCK
INFORMATION...
æ
Example: EASY822-DC-TC
Example: EASY819-DC-RC
DC TCA LCD NET
OS : 1.10.208
CRC: 21779
DC RC LCD NET
OS : 1.10.208
CRC: 21779
