6 Internal
6.7 Memory card
Operating instructions
05/10 MN05013003Z-EN
www.eaton.com
199
6.7.2.3 Saving a circuit diagram to the card
▶
Select DEVICE-CARD.
▶
Confirm the prompt with
OK
to delete the contents of the memory card
and replace it with the easy circuit diagram.
Press
ESC
to cancel.
6.7.2.4 Loading a circuit diagram from the card
▶
Select the CARD
→
DEVICE menu option.
▶
Press
OK
to confirm the prompt if you want to delete the easy memory
and replace it with the card content.
Press
ESC
to go back one menu.
6.7.2.5 Deleting a circuit diagram on the card
▶
Select the DELETE CARD menu option.
▶
Press
OK
to confirm the prompt and to delete the card content.
Press
ESC
to cancel.
REPLACE ?
DEVICE-CARD
CARD-DEVICE
DELETE CARD
CAUTION
Once you have started the CARD
→
DEVICE transfer, the
following operation is initiated:
•
The RAM of the device is loaded from the card.
•
The internal program memory is cleared.
•
The data is written from the card to the internal retentive
program memory.
This is carried out in blocks. A complete program is not
transferred to the RAM for space reasons.
If an invalid program or an interruption occurs during the read or
write operation, easy500 or easy700 loses the program in the
internal memory.
DELETE ?
Summary of Contents for easy500, easy700
Page 4: ...II...
Page 28: ...1 1 5 operating principles 24 Operating instructions 05 10 MN05013003Z EN www eaton com...
Page 210: ...7 What Happens If 7 3 Event 206 Operating instructions 05 10 MN05013003Z EN www eaton com...
Page 234: ...9 Glossary of terms 230 Operating instructions 05 10 MN05013003Z EN www eaton com...
