Eaton EASY222-DN, User Manual

Page: 174 / 284

easy800/MFD control
commands
170
09/10 MN05013007Z-EN
Inputs/outputs of easyLink: RW/SW
This service allows you to read the local R and S data and the
data of the NET stations (1 – 8) transferred via easyLink,
again from the relevant easy800/MFD image.
Byte Meaning Value (hex), sent by
Master Slave Master Slave
Attribute ID: Read 91 –
Response:
0 Read successful – C2
Command rejected – C0
0 1 Len 02 02
1 2 Part no. For RW: 07 For RW: 07
2 For SW: 09 For SW: 09
3 Index 00/01 – 08
1)
00/01 – 08
1)
3 4 Data 1 (Low Byte) 00 a table 85
4 5 Data 2 (High Byte) 00 a table 85
5 – 6 6 – 7 Data 3 – 4 00 00
1) 00 = Local input/output
01 – 08 = Address of network station (NET-ID 1 – 8)