Eaton EASY-RTD-DC-43-03B1-00, Manual

Page: 50 / 91

5. Commissioning
5.1 Initial commissioning
l
Administrate
Please note that the easy-RTD cannot be used until these user group passwords
have been defined.
Define the passwords for each user group in order to protect your
device.
For more instructions, please refer to the "Operation" section → page 55
5.1.1 Setting passwords
The password must be made up of exactly six characters (uppercase letters and num-
bers only), and you will need to enter it again for confirmation.
Tap the input field.
The keyboard will appear.
Enter the password for Watch password.
Confirm by tapping the button.
Enter the password again to confirm it
Confirm by tapping the button.
Repeat the steps above for the Operate password
Repeat the steps above for the Administrate password
After you set up the passwords, the Device information menu will appear. None
of the user groups will be logged in at this point.
5.1.2 Setting a language
As soon as the easy-RTD is ready, you can select one of the available menu nav-
igation languages.
50
easy Remote Touch display 06/21 MN048027EN Eaton.com