Eaton EASY-RTD-DC-43-03B1-00, Manual

Page: 15 / 91

1. Description
1. Description
The easy Remote Touch display is an external touch display that duplicates the dis-
play and controls on easyE4 base devices in color. A single easy-RTD can be connec-
ted to multiple easyE4 control relays, but only one connection can be established at a
time. However, the connection can be switched between multiple easyE4 control
relays. The corresponding data is transmitted through an Ethernet connection bet-
ween the easy Remote Touch display and the easyE4 control relay. In addition, a
series of password-protected permissions can be used to control access so that the
easyE4 can only be used by authorized personnel to operate the easy Remote Touch
display.
The easy Remote Touch display was designed as an intuitive control and monitoring
device for the easyE4 control relay and can be used outside of a control cabinet as
an HMI (human-machine interface). easy-RTD devices require little space and are
intended for front flush mounting, meaning that they are inserted into the cor-
responding enclosure from the front.
easyE4 control relays are normally installed inside the corresponding control cabi-
net, meaning that easyE4 base device displays and buttons are not directly acces-
sible to machine operators. Accordingly, the easy-RTD should be installed in the
immediate vicinity in control panels, switchboards, or the control cabinet door itself.
The full-color display supports all the options offered by easySoft 7 for designing
graphic user interfaces. Texts, values, bar charts, and parameters can all be visua-
lized in color. Within this context, the display on the easyE4 base device will be dupli-
cated.
easy Remote Touch display 06/21 MN048027EN Eaton.com
15