Eaton DX-NET-PROFINET-2, Manual

Page: 39 / 49

4 Commissioning
4.6 Operation
36
DX-NET-PROFINET-2 09/13 MN04012007Z-EN www.eaton.com
4.6.3 Acyclic data
Base Mode Parameter Access can be used to read or modify parameters.
The corresponding index number can be found in the following table.
Select a value of 0 for the API and slot and a value of 1 for the sub-slot.
Table 3: Parameter Data
PNU Description Access
right ADI
number API Slot Sub-slot Index
1 Variable frequency drive ID ro 9 0 0 1 0009
2 Variable frequency drive part no. ro 10 0 0 1 000A
3 Control section software ro 11 0 0 1 000B
4 Control section checksum ro 12 0 0 1 000C
5 Software power section ro 13 0 0 1 000D
6 Power section checksum ro 14 0 0 1 000E
7 Serial number 1 ro 15 0 0 1 000F
8 Serial number 2 ro 16 0 0 1 0010
9 Serial number 3 ro 17 0 0 1 0011
10 Serial number 4 ro 18 0 0 1 0012
11 P1-01 maximum frequency / maximum speed rw 101 0 0 1 0065
12 P1-02 minimum frequency/DX-NET-PROFINET-2;
minimum speed rw 102 0 0 1 0066
13 P1-03 Acceleration time (acc1) rw 103 0 0 1 0067
14 P1-04 Deceleration time (dec1) rw 104 0 0 1 0068
15 P1-05 Stop Function rw 105 0 0 1 0069
16 P1-06 Energy optimization rw 106 0 0 1 006A
17 P1-07 Motor, rated operating voltage rw 107 0 0 1 006B
18 P1-08 Motor, rated operational current rw 108 0 0 1 006D
19 P1-09 Motor, rated frequency rw 109 0 0 1 006E
20 P1-10 Motor, rated speed rw 110 0 0 1 006F
21 P1-11 Output voltage at zero frequency rw 111 0 0 1 0070
22 P1-12 Control level rw 112 0 0 1 0071
23 P1-13 Function of the digital input rw 113 0 0 1 0072
24 P1-14 Parameter range access code
(depends on P2-40 and P6-30) rw 114 0 0 1 0073
25 P2-01 Fixed frequency FF1 / speed 1 rw 201 0 0 1 00C9
26 P2-02 Fixed frequency FF2 / speed 2 rw 202 0 0 1 00CA
27 P2-03 Fixed frequency FF3 / speed 3 rw 203 0 0 1 00CB
28 P2-04 Fixed frequency FF4 / speed 4 rw 204 0 0 1 00CC
29 P2-05 Fixed frequency FF5 / speed 5 rw 205 0 0 1 00CD
30 P2-06 Fixed frequency FF6 / speed 6 rw 206 0 0 1 00CE