Instructions for the DeviceNet
®
Product
Instruction Leaflet
IL17559 Rev. D
Operated Network Interface (DPONI)
Effective August 2009
EATON CORPORATION
www.eaton.com
9
Appendix B: Assembly Object Instances for MP-3000
To Change the Active Assembly
The following example shows how to change the active assembly with an explicit message. This example uses C-H Studio, the Eaton
Corporation DeviceNet setup tool; however, similar procedures should be available using other vendors. In the data field shown, 97 (hex)
represents assembly instance 151 (temperatures). Use the hex value of the desired instance to select the appropriate assembly. Next,
send the explicit message to the DPONI to change the polled assembly instance.
Produced Assembly Instances
There are eight producing assemblies supported for the MP-3000, as indicated in the following table.
Table B-1. Produced Assembly Instances.
Inst #
Assembly Name
Number of
Data Bytes
Access
150
Status
4
Get
151
Temperatures
26
Get
152
Currents 14
Get
153
MotorData
20
Get
154
MotorMaximums 52 Get
155
MotorTripCounts
54
Get
156
MotorAlarmCounts 40 Get
157
Flags
16
Get
158
Reserved -
Get
159
Reserved
-
Get
160
Reserved -
Get
161
Reserved
-
Get
162
Reserved -
Get
163
Reserved
-
Get
164
Reserved -
Get
