Eaton Current-Limiting Reactor, Installation Manual

Page: 22 / 32

14 Eaton Current-Limiting Reactor (2500A) Installation Manual P-164001115—Rev 02
Figure 10. PT100 Sensor
FRONT
Cover Plate
Terminal Block Compartment
is attached to the upper front
panel with a cover plate.
Installers must wire from overhead
through the top opening in the Terminal
Block Compartment.
Installers must make their own cut-outs
through top cable entry panel.
The factory wires from the
sensor to the bottom of the
termnal blocks.
Installers wire from overhead
to the top of the termnal
blocks.
Cover plate has (2)
1/4 turn screws.
Power Cabling