January 2017
INS 801-745 Rev B
Instruction sheet
MTL surge protection
MTL LS Range
Operating Instructions for
LED Lighting Type 2 SPD
Eaton Electric Limited,
Great Marlings, Butterfield, Luton
Beds, LU2 8DL, UK.
Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283
E-mail: [email protected]
www.mtl-inst.com
© 2017 Eaton
All Rights Reserved
Publication No. INS 801-745 Rev B 060117
January 2017
1
CAUTION
Do not attempt to open or tamper with the SPD in any way as this will
compromise performance and will void the warranty.
Megger and hi-pot tests will damage this device. Disconnect all power
supplying the equipment and isolate the SPD unit before testing.
Prior to installation, confirm the SPD is rated for the correct voltage,
and frequency equivalent to the application.
Installation
1) Turn off all power supplying this equipment.
2) Mount the SPD using the enclosure flanges to a flat surface.
3) Connect the wire leads as per the wiring diagrams below.
4) For optimal device performance, use shortest length of wire possible and avoid
sharp or unnecessary bends.
Product Characteristics
Model
Voltage
Conn
Modes
Freq
In
Diagram
LS10-347V-S
LS10N-347V-S2 120-347, 5A
SERIES
L-N, L-G, N-G 50/60
3 kA
A
LS10-480V-S
LS10N-480V-S2
480, 5A
SERIES
L-G, L-L
50/60
3 kA
B
LS12-347V-P
LS12N-347V-P2
120-347
PARALLEL L-N, L-G, N-G 50/60
3 kA
C
LS12-480V-P
LS12N-480V-P2
480
PARALLEL
L-G, L-L
50/60
3 kA
D
