9
Installation manual 10679
Effective October 2017
BSPA Type 1 and Type 2 surge protective devices
Eaton.com/bussmannseries
13. Voltage configurations per enclosure size
P1 enclosure
P2 enclosure
120N/240N
50 – 200 kA
600D
50 – 200 kA
240S
50 – 100 kA
240S
120 – 200 kA
208Y/415Y/
480Y/600Y
208Y/415Y/
480Y/600Y
240D/480D
240D/480D
14. Warranty
The BSPA is warranted to be free from defects in both workmanship
and materials for a period of ten years from the date of delivery to
the purchaser.
The Bussmann Division assumes no risk or liability for results of
the use of the product purchased, including but not limiting the
generality of the foregoing:
(1) The use in combination with any electrical or electronic
components, circuits, systems, assemblies or any other materials
or substances.
(2) Unsuitability of any product for use in any circuit or assembly.
Purchaser’s rights under the warranty shall consist solely of
requiring the Bussmann Division to repair, or at the Bussmann
Division’s sole discretion, replace, free of charge, F.O.B. factory,
any defective items received at said factory within said term
determined by the Bussmann Division to be defective. The giving of
or failure to give any advice or recommendations by the Bussmann
Division shall not constitute any warranty by or impose any liability
upon the Bussmann Division AND IS IN LIEU OF ANY AND ALL
OTHER WARRANTIES EXPRESSED, IMPLIED OR STATUTORY
AS TO THE MERCHANTABILITY, FITNESS FOR PURPOSE SOLD,
PRODUCTIVENESS OR ANY OTHER MATTER. In no event shall the
Bussmann Division be liable for special or consequential damages or
for delay in performance of the warranty.
This warranty does not apply if the unit has been misused, abused,
altered, tampered with, or applied in excess of the specifications
other than those written on the nameplate. At the end of the
warranty period the Bussmann Division shall be under no further
warranty obligation expressed or implied.
The Bussmann series BSPA covered by this warranty certificate can
only be repaired or replaced by the factory. A RETURN MATERIAL
AUTHORIZATION (RMA) number must be obtained. Please
enter a Vista warranty claim by contacting your local authorized
Bussmann series product distributor or sales representative for
help entering a claim or to obtain an update on your claim status.
Repair or replacement will be returned collect. If it is determined
that the returned product contains manufacturer’s defects then
the Bussmann Division will replace the defective product at the
Bussmann Division’s expense (including shipping charge).
