5
Installation manual 10679
Effective October 2017
BSPA Type 1 and Type 2 surge protective devices
Eaton.com/bussmannseries
0.16 (4.1)
Mounting feet
(included)
3.19
(81.0)
7.13 (181.2)
Overall base
including
stabilization ribs
5.56 (141.2)
0.75 (19.1)
3.75
(95.3)
6.62 (168.1)
5.50 (139.6)
Lid
1.00 (25.4)
6.00
(152.3)
Lid
3/4-14 NPS
external thread
Locknut
36-inch
long wires
Mounting feet
(included)
1.12 (28.5)
4x #8 [m 4]
Flathead screw
(not included)
5.48 (139.2)
5.98
(151.2)
7.75
(196.9)
9.00
(228.6)
4X Ø
0.223
5.48 (139.2)
7.25 (184.2)
8.50 (215.9)
0.80
(20.3)
4.17
(105.9)
0.0747 THK
1.51
(38.4)
1.51
(38.4)
8.62 (219.0)
7.50 (190.5) Lid
9.13 (232.0)
7.56 (192.0)
overall base including
stabilization ribs
0.75 (19.1)
3.19
(81.1)
0.16 (4.1)
mounting feet
(included)
8.50
(215.9)
Lid
1.00 (25.4)
4x #8 (m4)
Flathead screw
(not included)
3/4-14 NPS
external thread
Locknut
Mounting feet
(included)
36-inch
long wires
3.75
(95.3)
2.38
(60.4)
8.48
(215.4)
10.25
(260.4)
11.50
(292.1)
7.48 (190.0)
9.25 (235.0)
10.50 (266.7)
4X Ø
0.223
0.80
(20.3)
6.67
(169.4)
0.0747 THK
1.51
(38.4)
1.51
(38.4)
6.4 Enclosure mounting feet and dimensions
The mounting feet attach to the bottom of the enclosure with
the provided screws (hardware to mount the feet to wall are not
included). See Figures 4 and 5 below.
Figure 4. P1 enclosure with mounting feet dimensions.
Figure 5. P2 enclosure with mounting feet dimensions.
6.5 Optional flush mount plate and dimensions
Optional flush mount plates are available for both the P1 and P2
enclosure sizes. See Figures 6 and 7 below.
Catalog No.
BSPA-FLUSHPLT1
– P1 enclosure flush mount plate
Catalog No.
BSPA-FLUSHPLT2
– P2 enclosure flush mount plate
Figure 6. Optional P1 enclosure flush mount plate. Catalog
No. BSPA-FLUSHPLT1.
Figure 7. Optional P2 enclosure flush mount plate. Catalog
No. BSPA-FLUSHPLT2.
