15 Appendix
15.4 XML configuration for 3rd party devices
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
77
<PARAM name="Field bus Hz">
<LENGTH>1</LENGTH>
<OFFSET>7</OFFSET>
<GROUP>1</GROUP>
<SFACTOR>1</SFACTOR>
<REPRESENTATION>3</REPRESENTATION>
</PARAM>
</device_parameters>
15.4.2 Example 2
Two device-specific bytes are used; see the <device_specific_bytes>
section
There are no additional parameters.
<device_name>EPBMETER</device_name>
<device_family>ETN METER</device_family>
<device_specific_bytes>
<LENGTH>2</LENGTH>
<OFFSET>2</OFFSET>
<FIRST_BYTE_VALUE>0</FIRST_BYTE_VALUE>
<SECOND_BYTE_VALUE>5</SECOND_BYTE_VALUE>
</device_specific_bytes>
<group_parameters id="1">
<LENGTH>60</LENGTH>
<OFFSET>1</OFFSET>
<MOD_FC>4</MOD_FC>
</group_parameters>
<group_parameters id="2">
<LENGTH>10</LENGTH>
<OFFSET>1</OFFSET>
<MOD_FC>3</MOD_FC>
</group_parameters>
<group_parameters id="3">
<LENGTH>0</LENGTH>
<OFFSET>0</OFFSET>
<MOD_FC>0</MOD_FC>
</group_parameters>
<group_parameters id="4">
<LENGTH>0</LENGTH>
Summary of Contents for BreakerVisu NZM-XMC-MDISP35-MOD
Page 4: ...2...
