15 Appendix
15.1 Notifications
BreakerVisu
06/16 MN01210001Z-EN
www.eaton.com
57
15 Appendix
15.1 Notifications
BreakerVisu can store up to ten notifications, with the oldest being overwrit-
ten as necessary. These notifications are triggered by various events during
the BreakerVisu program's runtime, including those involved in importing
new device types, as well as those having to do with measurements,
installed storage devices, and communications with higher-level systems.
Table 45:
List of notifications
Information
Cause of event
Reason
Recommended course of action
XML import failed
How the device type was imported
Corrupted file, incorrect XML data
structure
Repair the XML file and try importing
the device type again
Error when closing measured
value files, Unable to open files,
Unable to write to files, Unable
to close files
Measurement
A file operation error occurred during
logging
Check the selected storage device
and restart the program.
If the error continues to occur,
contact BreakerVisu Support.
Storage device not installed
Measurement
There is no SD card or USB flash
drive plugged in
Check to make sure that the SD card
or USB flash drive is plugged in
properly
Unable to open
successfully restored backup
copy.
Unable to read backup copy.
MMC not connected.
Unable to store new settings.
When the backup copy is restored
when BreakerVisu is restarted
A message regarding the restore
status is output during the restore
process
Check the selected storage device
and restart the program.
If the error continues to occur,
contact BreakerVisu Support.
Error when generating OPC file
OPC gateway (feature requiring
license)
An error occurred when the OPC
symbol file was being created.
Restart the BreakerVisu program.
The license is still there and Breaker-
Visu will attempt to generate the
symbol file again.
If the error continues to occur,
contact BreakerVisu Support
Summary of Contents for BreakerVisu NZM-XMC-MDISP35-MOD
Page 4: ...2...
