Commissioning
Copyright © 2009-2010 Eaton Corporation. All Rights Reserved.
IPN 997-00012-53B December 2010
85
Notes
1
When the rectifiers are turned off, the battery current will supply all the current to the load.
At this time the battery current will equal the load current.
This test assumes there is a current sensor on the dc Load Bus. If batteries are not installed
on the system, connect the load bank to the battery bus.
If the battery current is determined by a summation, conduct the load current test before
the battery current test.
2
The test should be done at the maximum expected system load current.
This test assumes there is a current sensor on the dc load bus.
3
As the analog inputs can be configured for many different types of analog signal, tests have
not been detailed on this test sheet.
User assigned analog inputs are not available on all systems.
