manualshive.com logo in svg

Eaton 93PM 150 kW SIAC-B Three-Wire, Installation And Operation Manual, Page: 16 / 106

Share
Download
Eaton 93PM 150 kW SIAC-B Three-Wire Installation And Operation Manual Download Page 16

Introduction

1-6        Eaton 93PM Sidecar Integrated Accessory Cabinet-Bypass (150 kW and 200 kW SIAC-B) Installation and Operation Manual  P-164000387—Rev 7

 www.eaton.com/powerquality

1.7

For More Information

Refer to the 

Eaton 93PM UPS (20–150 kW, 480V – 150 kW Capacity Frame) Installation and Operation Manual

, 

the 

Eaton 93PM UPS (20–150 kW, 480V Four Wire – 150 kW Capacity Frame) Installation and Operation 

Manual

, the 

Eaton 93PM Emergency Lighting UPS (20–40 kW, 480V Four Wire – UL 924) Installation and 

Operation Manual

, the 

Eaton 93PM UPS (20–200 kW, 480V – 200 kW Frame) Installation and Operation 

Manual

, or the 

Eaton 93PM UPS (20–200 kW, 480V Four Wire – 200 kW Frame) Installation and Operation 

Manual

 for the following additional information:

l

UPS, optional components, and accessory installation instructions, including site preparation, planning for 
installation, and wiring and safety information. Detailed illustrations of cabinets and optional accessories 
with dimensional and connection point drawings are provided.

l

UPS operation, including UPS controls, functions of the UPS, standard features and optional accessories, 
procedures for starting and stopping the UPS, and information about maintenance and responding to 
system events.

l

Communication capabilities of the UPS system.

Refer to the 

Eaton 93PM Integrated Accessory Cabinet-Distribution (50 kW, 100 kW, 150 kW, and 200 kW 

IAC-D) Installation and Operation Manual

 for the following additional information:

l

Installation instructions, including site preparation, planning for installation, wiring and safety information, 
and detailed illustrations of cabinets with dimensional and connection point drawings

l

Operation, including breakers, standard features and optional accessories, procedures for using the tie and 
bypass functions, and information about maintenance

Visit www.eaton.com/powerquality or contact an Eaton service representative for information on how to obtain 
copies of these manuals.

1.8

Getting Help

If help is needed with any of the following:

Scheduling initial startup

Regional locations and telephone numbers

A technical question about any of the information in this manual

A question this manual does not answer

Please call the Customer Reliability Center at:

United States:

1-800-843-9433

Canada:

1-800-461-9166 ext 260 

All other countries:

Call your local service representative

Please use the following e-mail address for manual comments, suggestions, or to report an error in this manual:

[email protected]

Summary of Contents for 93PM 150 kW SIAC-B Three-Wire











































































































Reviews:

No comments