Eaton 9315P, Installation And Operation Manual

Page: 27 / 62

Installation
Eaton 9315/9390/9395/9395P Fixed Primary Sync Control Installation and Operation Manual P-164000023—Rev 03 3-3
Figure 3-3. Eaton Fixed Primary Sync Control TB1 Terminal Block Detail
Bypass Voltage Phase A – Secondary UPS
UPS-1, -3 Bypass Voltage Phase B Return - Secondary UPS (see Note 2)
Bypass Voltage Phase A – Primary Source
Load Voltage Phase A – Secondary UPS
Load Voltage Phase A – Primary Source
On Bypass Common
Secondary UPS – On Bypass NO
NOT USED
UPS-1 BYPASS DISABLE Building Alarm 1 – Secondary UPS (see Note 1)
UPS-1 BYPASS DISABLE Building Alarm 1 Return – Secondary UPS (see Note 1)
Building Alarm 2 – Secondary UPS (see Note)
Building Alarm 2 Return – Secondary UPS
Jumper
Bypass Voltage Phase B – Secondary UPS
Bypass Voltage Phase C (9315 & 9395P)/Neutral (9390/9395)
Load Voltage Phase B – Primary Source
Load Voltage Phase C (9315 & 9395P)/Neutral (9390/9395)
Bypass Voltage Phase B – Primary Source
Bypass Voltage Phase C (9315)/Neutral (9390/9395)
Load Voltage Phase B – Secondary UPS
Load Voltage Phase C (9315 & 9395P)/Neutral (9390/9395)
UPS-1, -3 Bypass Voltage Phase A Return (9315 only) (Secondary UPS) (see Note 2)
UPS-1, -3 Bypass Voltage Phase C Return (9315 & 9395P) (Secondary UPS) (see Note 2)
UPS-2, -4 Bypass Voltage Phase B Return - Secondary UPS (see Note 2)
UPS-2, -4 Bypass Voltage Phase A Return (9315 & 9395P only) (Secondary UPS) (see Note 2)
UPS-2, -4 Bypass Voltage Phase C Return (9315 & 9395P only) (Secondary UPS) (see Note 2)
UPS-2 BYPASS DISABLE Building Alarm 1 – (Secondary) (If installed)
UPS-2 BYPASS DISABLE Building Alarm 1 Return – (Secondary) (If installed)
UPS-3 BYPASS DISABLE Building Alarm 1 – (Secondary) (If installed)
UPS-3 BYPASS DISABLE Building Alarm 1 Return – (Secondary) (If installed)
UPS-4 BYPASS DISABLE Building Alarm 1 – (Secondary) (If installed)
UPS-4 BYPASS DISABLE Building Alarm 1 Return – (Secondary) (If installed)
UPS-5 BYPASS DISABLE Building Alarm 1 – (Secondary) (If installed)
UPS-5 BYPASS DISABLE Building Alarm 1 Return – (Secondary) (If installed)
UPS-6 BYPASS DISABLE Building Alarm 1 – (Secondary) (If installed)
UPS-6 BYPASS DISABLE Building Alarm 1 Return – (Secondary) (If installed)
Distributed
Bypass Only
NOTE 1 If a Building Alarm is being used for another purpose, any unused building alarm on the 9315/9390/9395/9395P UPS can be used for the Sync Control.
NOTE 2 FOR DISTRIBUTED BYPASS SYSTEMS (Multiple UPSs) USE:
TB1-16, -17, -18 for UPS-1 and UPS-3