Operating Instructions
6
1.
NEVER
use air from this compressor for breathable air except in full compliance with OSHA
Standards 29 CFR 1910 and any other Federal, State or Local codes or regulations.
2. DO NOT use air line anti-icer systems in air lines supplying respirators or other equipment used to
produce breathable air.
DO NOT
discharge air from these systems in unventilated or other confined
areas.
Death or serious injury can result from inhaling compressed air
without using proper safety equipment. See OSHA standards on safety
equipments.
DANGER
This equipment is supplied with a ASME designed pressure vessel protected by an ASME rated relief valve. Pull the
ring before each use to make sure the valve is functional. Refer to figure 10.
DO NOT
attempt to open valve while the
machine is under pressure.
Be sure all operators and others around the compressor and its controls comply with all applicable OSHA, Federal,
State and Local regulations, codes and standards relating to personal protective equipment. This includes respiratory
protective equipment, protection for the extremities, protective clothing, protective shields and barriers, electrical
protective equipment, and personal hearing protective equipment.
A forklift may be necessary for unloading the Polar Air compressor. Use all forklift safety measures and require a
certified forklift operator. Refer to figure 1 for safe unloading procedure.
Make sure pallet-mounted compressors are firmly secured to the
pallet before moving. NEVER attempt to move a compressor that is not
secure as serious injury or property damage could occur.
Inspect compressor prior to any use. Check for external damage that
might have occurred during transit. Be careful of moving parts then test
pulley by turning it freely by hand.
Report any damage to delivery carrier
immediately.
WARNING
CAUTION
Breathable Air
Pressurized Components
Personal Protective Equipment
Inspection
