Safety and Electrical Connections
1.
Always disconnect the electrical supply before handling, maintaining,
repairing or installing any pond equipment.
2. Do not open the controller. There are no serviceable parts inside the
controller.
3. Connect the 110 volt plug of the controller/transformer to a 110 volt
receptacle that is protected by a Ground Fault Circuit Interrupter.
4. Do not modify wiring in any way, quick plug ends must stay intact to
function and should not be replaced with any other connections.
5. Do not use with swimming pools or spas.
6. Only connect to matching 2 pin cords, splitters and lighting fixtures.
7. All electrical work must be performed by a qualified technician. Always follow
the National Electrical Code (NEC) or the Canadian Electrical Code as well as
all local, state and provincial codes. Failure to follow manufacturer’s installation
instructions may result in electrical shock, fire hazard, personal injury or
death, damaged equipment, provide unsatisfactory performance and will void
manufacturer’s warranty.
WLC2 • WLC4 • WLC6
Controller Features and Includes
• Weatherproof with mounting holes
• Built in digital timer
• Built in voltage regulator for adequate voltage for lights up to 300’ away
• 115 volt input with 12v AC output
• Pigtail with 2 pin receptacle and quick connect end.
Thank you for purchasing the controller for
warm white lights from EasyPro.
These controllers will power up to 2, 4 or 6
2 pin LED lights depending
on the model.
Controller
with Digital Timer
Instructions for Operation
Safety • Warranty
