background image

High Quality

TM Series Waterfall Pumps

Instructions for Operation • Safety • Warranty

Thank you for purchasing the TM series waterfall pump. This instruction manual 
explains the product operations and gives important precautions regarding its safe 
use. In order to use the product to maximum benefi t, be sure to read the instructions 
thoroughly and follow them carefully.
To avoid accident, do not use the pump in any way other than as described in this 
instruction manual especially when you see “WARNING”. After reading this instruction 
manual, keep it nearby as a reference in case questions arise during use.
If this instruction manual should become lost or damaged, ask your nearest dealer or 
representative for another copy.

Safety & Electrical Connections 

WARNING: Verify that the voltage and frequency of the electric pump shown 
on the nameplate correspond to those available on the mains.

The installer must make sure that the electric system is grounded in accordance with 
local ordinances.
The plug and connections should be protected from water/rain. Before using the 
pump, always inspect it visually (especially power cable and plug).
Do not use the pump if it is damaged.
If the pump is damaged, have it inspected by a qualifi ed service center only.
Make sure that electric connections are protected from all water and moisture. Protect 

the plug and the power cable from heat, oil or sharp edges.
WARNING: The power cable must be replaced by qualifi ed personnel only.

Grounding: The plug of the power cable has a double grounding contact, so that grounding can be performed by simply 
inserting the plug.
Overload Protection: EasyPro pumps have a built in thermal protection switch. The pump stops if an overload condition 
occurs. The motor restarts automatically after it has cooled down.

Prior to Operation

Check the following points upon receipt of your pump:
Is the pump exactly what you ordered? Check nameplate. Has any damage occurred during shipment? Are any bolts 
or nuts loose? Have all necessary accessories been supplied? We recommend that you keep a spare pump on hand in 
case of emergencies. Keep this instruction manual in a place for future reference.

TM9500 • TM13500

Summary of Contents for TM Series

Page 1: ...inances The plug and connections should be protected from water rain Before using the pump always inspect it visually especially power cable and plug Do not use the pump if it is damaged If the pump is damaged have it inspected by a qualified service center only Make sure that electric connections are protected from all water and moisture Protect the plug and the power cable from heat oil or sharp...

Page 2: ...let the pump run as a sump pump The pump power cord should be connected to a separately fused grounded line with a minimum capacity of 15 amps It can be connected to non fuse breaker at the recommended amps Never touch the pump when it is plugged in 1 Before installing or servicing this pump be certain pump power source is disconnected Contact a qualified li censed electrician for disconnecting el...

Page 3: ...ards not included with pump arrow on valve should point in direction of flow Discharge shut off valve if used may be closed Impeller or volute openings are fully or partially clogged remove pump and clean Pump is air locked start and stop several times by plugging and unplugging cord check for clogged vent hole in pump case Inlet holes in pump base are clogged remove pump and clean the openings Ve...

Page 4: ...om the produc tion sale use or misuse of this product The manufacturer or supplier shall not be held liable for any loss of fish plants or any other livestock as a result of any failure or defect of this product If you experience a failure of your pump please check the following before returning to us 1 Remove filter housing clean and inspect impellar and surrounding chamber reassemble and test pu...

Reviews: