EasyPBX EPDH008, Quick User Manual

Page: 3 / 20

‐ 2 ‐
Introduction
Purpose
Thank you for purchasing an
EasyPBX Phone System.
The purpose of this document is to provide you with a guide to getting
the system up and running quickly. Full instructions for installing, configuring and operating the system can be found on the
supplied CD.
Safety Information
When using your
EasyPBX Phone System
please adhere to the following safety points.
•
Read and follow all instructions carefully.
•
Follow all warnings and instructions on the product.
•
Unplug the product from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
•
Do not use this product near water.
•
Do not place this product on an unstable cart, stand or table.
•
Do not allow anything to rest on the power cords. Do not place this product in a location where the cords can be
stepped on or where someone can trip over them.
•
Do not use this product near an area where there is a potential of gas leaks or near any explosive fumes.
•
Do not place this product near or over a radiator or any other heat source.
•
Use ONLY the power cord supplied with the system.
•
Do not overload the wall outlet or power cord where the power cord is installed. This can result in fire or electric
shock.
•
This equipment is to be opened by ONLY a qualified serviceperson. There are no user serviceable parts inside.
Opening this equipment may expose you to dangerous voltage and other risks. Incorrect re ‐ assembly of this
equipment may result in electric shock.
•
Avoid spilling liquid on this equipment and do not insert any objects through the ventilation slots.
Warranty
RhinoCo Technology (ABN 74 001 621 610) (Seller), warrants its products to be in conformance with its own plans and
specifications and to be free from defects in materials and workmanship under normal use and service for twelve months from
the date of original purchase. Seller’s obligation shall be limited to repairing or replacing, at its option, free of charge for
materials or labour, any part which is proved not in compliance with Sellers specifications or proves defective in materials or
workmanship under normal use and service. Seller shall have no obligation under this Limited Warranty or otherwise if the
product is altered or improperly repaired or serviced by anyone other than Seller.
For warranty service, return transportation prepaid, to 9 Hannabus Place McGraths Hill NSW 2756. Seller has no obligation to
attend the buyer’s location to retrieve the goods or make repairs onsite.
There are no warranties, expressed or implied, of merchant ability, or fitness for a particular purpose or otherwise, which
extend beyond the description on the face hereof. In no case shall Seller be liable to anyone for any consequential or
incidental damages for breach of this or any other warranty, express or implied, or upon any other basis of liability
whatsoever, even the loss or damage is caused by its own negligence or fault.
Seller does not represent that the products it sells may not be compromised. Consequently, Seller shall have no liability for
any personal injury; property damage or other loss based on a claim the product failed. However, if Seller is held liable,
whether directly or indirectly, for any loss or damage arising under this limited warranty or otherwise, regardless of cause or
origin, Seller's maximum liability shall not in any case exceed the purchase price of the product, which shall be the complete
and exclusive remedy against Seller.
This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No increase or
alteration, written or verbal, of the obligations of this Limited Warranty is authorised.