easynet ED-U1600, Quick Setup Manual, Page: 8 / 40

6
HOW TO START THE DVR
1. Connect the supplied USB mouse into any available USB port.
2. Connect the power cable from the power source outlet (preferably a UPS) to the back of the DVR.
Turn on and start the DVR.
• Using Front Panel/Remote: Press the POWER button for 3 seconds.
• Using Mouse: Not supported
IMPORTANT STEP: IF YOU ARE USING BNC TYPE MONITOR ONLY, WHICH IS
CONNECTED TO MAIN 2
• Using Front Panel/Remote: Set the Front Panel/Remote to control Main 2.
Press the MON button and 2 button.
• Using Mouse: On the Main 1, move the mouse cursor towards the right side of the screen and keep moving
right until mouse cursor appears on Main 2.