Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
everyday solutions
™
Est. 1992
Cleaning and Maintenance
• Always ensure the shaver is unplugged and switched off before cleaning.
Clean the shaver:
• Pull open the shaving heads one by one (Fig. 1).
• Rotate and pull open the centre head last (Fig. 2).
• Tip any collected hair into a waste receptacle.
• Use the provided cleaning brush to remove any hair or
residue inside the accessory.
• Wash only the shaver head, not the whole body, with
water (Fig. 3).
• Leave the shaving heads open to dry completely.
Nose/Ear Hair Trimmer and Hair Clippers:
• Clean the blades with the cleaning brush and tap water.
Main Unit
• Only use a soft damp cloth to clean the main unit of the shaver and never
immerse the whole unit in liquids.
Lubricating
• Using the supplied blade oil, lubricate the trimmer blades and shaver heads
with a small drop of oil once every 6 months or when blades do not
move freely.
Using the Toothbrush
1. Make sure the shaver is off before attaching the
toothbrush and adapter.
2. Insert the toothbrush into the toothbrush adapter.
3. Then firmly press the brush and adapter into the main unit
until it clicks into place.
Brushing
1. Wet the bristles and apply a small amount of toothpaste.
2. Place the toothbrush bristles against the teeth at a slight angle towards
the gum line.
3. Press the power on/off button to turn on.
4. Gently move the brush head slowly across the teeth in a small back and
forth motion so the longer bristles reach between your teeth. Continue this
motion throughout your brushing cycle.
5. After you have completed the brushing cycle, you can spend additional
time brushing the chewing surfaces of your teeth and areas where staining
occurs. You may also brush your tongue, with the toothbrush turned on or
off, as you prefer.
Fig. 1
Fig. 2
Fig. 3
