EasyIO q9, User Manual, Page: 7 / 10

EasyIO Q9 tablet - Basic v1.2
7
Ethernet
To connect the tablet to some device by Ethernet you need to configure the Ethernet network.
•
Set to Use Static IP.
•
Set the IP Address of your Q9 tablet.
•
Set the Gateway as the IP Address of your device (Jace or FG32).
•
Set the Netmask of your network (normally 255.255.255.0).
•
About DNS you need to fill it because without DNS the Ethernet will not work.
So use the Goolge DNS in the case of being connected to the internet.