FC-20 Series – Firmware Upgrade v1.3
12
Firmware Upgrade
Step 1
Obtain the required files from EasyIO technical support at
. The firmware file is a
.bin file.
Latest firmware with BTL certification is
FC-20 V2.2.00.bin
Step 2
Launch FC FwTool.exe.
Connect a USB to RS-485 to the PC and the EasyIO FC RS-485 Port 1.
**Only Port 1 is available for firmware upgrade. **
**Port 2 will not accept firmware upgrade**
Step 3
At the firmware upgrade tab, locate the .bin file.
Select the COM port that represents the USB RS-485 cable that is connected to your computer.
Step 4
While the controller is in ON mode, hold down both buttons for 1 second and release the reset
button (left button) , wait for the STS Led to flash fast and release the service button (right button).
