Card information:
Enter Card Information page, and the
screen will display the authorized User
Cards count, and card read access
events count.
4 . C a r d s I n f o r m a t i o n
Card Count: 1000
* Back
# Save
Format:
5 . F o r m a t
Enter Card Format page, a password
will be asked,input 8 digits installer
password (66666666 by default),then
press" #" key to save,format operation
is activated.all card information will be
cleared.
[ - - - - - - - - ]
Please Input Password
* Back
# Save
11. Change Door Station Language:
It's convenient to change the user interface for DPC-D218.Just put the config files to the SD
card and by means of the digital keypad of door station, only 30 seconds is needed to update.
SD Card Slot
Insert SD card
L1 L2
contained config files into the SD card slot
where is at the back of the door station.
CN-LK
T/R -T/R+
3 2 1
Bus
Refer to the right diagram.
3 2 1
J/KMB
JP-LK
Step 2:
If door station runs as Debug State, you can press “1#” to activate Tools Menu, select “2” to
enter setup page, then select 1 item. If it runs as Normal State, follow these steps:
