Easydiskusa Transporting Your Data Has Never Been This Easy
You can use the special EasyDisk Commands to format your EasyDisk and return it back to its original
state. These functions can be done from any operating system.
A. Format "@@frmt" - Use this command to "low level" format the EasyDisk or to format the
EasyDisk in Windows 2000 or Windows XP.
EasyDisk commands are initiated from your file command from your "File Manager" or "Windows
Explorer.
1. Open up and browse your EasyDisk drive.
2. Create a new directory called "@@frmt"
3. Right Click on the directly the folder and select properties.
4. In the "Attributes" section - select "Read-only", "Hidden", and "Archive". - then select "Apply" or
"OK"
file:///C|/Documents%20and%20Settings/Jesse/Desktop/easydisk.com/manual2/manual8.htm (1 of 3) [03/17/2003 8:38:14 PM]
