AFTER SALES SUPPORT
USA
877-386-8264
25
Cleaning and maintenance
USA
6. Knock the shaver head out gently over a sink to re-
move stubbles.
7. Thoroughly wash the shaver head under warm
running water from the inside and outside
(see
fig. F
).
8. Carefully dry the shaver head with a lint-free cloth or
a paper towel. In the process, do not push the shaving
foils in.
9. Without the shaver head mounted, use the On/Off
switch
5
to switch the shaver on for approx.
5–10 seconds to dispel any stubble from the shaver
blades
3
.
10. Switch the shaver back off.
11. Use the cleaning brush
7
to completely remove all
stubbles from the shaver blades and the entire top
part of the shaver (see
fig. H
).
12. Thoroughly rinse off the top part of the shaver and
the shaver blades under warm running water
(see
fig. G
).
13. Use the On/Off switch
5
to switch the shaver off
without the shaver head for approx. 5–10 seconds in
order to dispel water drops from the shaver blades
3
.
14. Use a lint-free cloth or a paper towel to thoroughly dry
off the shaver.
15. Firmly mount the shaver head on the shaver so that the
locking mechanism locks into place (see
fig. E
).
16. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.