AFTER SALES SUPPORT
Handling
USA
20
USA
877-386-8264
2. Take the protective cap
1
off of the shaver
(see
fig. A
).
3. Use the On/Off switch
5
to turn the shaver on.
4. While applying gentle pressure, move the shaver
head
2
perpendicular to the direction of hair
growth.
5. After a few strokes, use your free hand to check the
results and repeat step 4 if necessary.
6. Shave as described in steps 3–4.
7. If necessary, use the trimmer as described in the
chapter “Using the trimmer” (see
fig. C
).
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter “Daily
cleaning after a wet shave”.
Using the trimmer
Keep in mind that the trimmer always
generates a straight cutting edge. If you do
not want a straight cutting edge, you must
hold the shaver at an angle.
For hard-to-reach areas or for very precise
cuts, use a comb to check the hair you intend
to trim with the trimmer and the cut length.
Use the trimmer as follows:
1. Move the trimmer
13
all the way out until it audibly
locks into place (see
fig. C
).
2. Use the On/Off switch
5
to turn the shaver on.
