Easy-Laser XT11, User Manual

Page: 8 / 81

INFO DISPLAY ON XT11
The info display gives information about the battery status for both the Display unit and the connected measuring units.
When the Display unit is off, you can press to show battery information.
A. Battery information for the connected measuring units.
B. Serial number for the measuring unit. This number is also found on the back of the measuring unit.
C. The screen is locked. Press to enable the touch function on the screen again.
D. Battery information for Display unit XT11.
The remaining battery power is shown in percentage.
Battery is low, please charge.
The battery is being charged. When fully charged it shows 100.
No batteries, the Display unit is run via the adapter. Contact your Service center.
The battery is empty, the Display unit will turn off in approx. 5 seconds.
The cover is open, usually after a battery change. Close the cover.
Unbalanced battery, usually shown after a battery change. Start the Display unit and wait. When the
warning is gone, charge the Display unit.
The battery in the Display unit has a high temperature. Stop charging the Display unit and let it cool.
Start the Display unit and wait.
At least one of the batteries in the Display unit is damaged or missing.
Cannot start the Display unit. Contact your Service center.
Lock screen
When the Display unit is on: Press lock the touch function on the screen. Prevents unintentional clicks, for
instance when moving between work positions. To unlock, press again.
8
DISPLAY UNIT