CONTOUR SCT RACK
INSTRUCTIONS
Item #33328
• This unit must be securely mounted on a wall, cabinet, workbench etc., capable of holding
30lbs. [13.6kg.] plus pulling stresses from operation. The use of 1/4” screws or appropriately
sized bolts with washers and attachment to a structural member is highly recommended.
• If placing unit on a studded wall, attach to two studs using pre-cut, 15-3/4” spaced holes as
a guide.
• If attaching to a solid concrete or hollow block wall, the use of the proper anchors is required.
• For less secure mounting surfaces, the use of a 1” x 17” x 5” backer board affixed to the wall
is suggested as a mounting surface.
The
EASTWOOD CONTOUR SCT RACK
has been designed to conveniently hold an SCT and up to six
drums all in one easy to reach location.