To order parts and supplies: 800.343.9353 >> eastwood.com
7
SWITCHING JAWS
The Upper and Lower Shrinker and
Stretcher Jaws are attached by (4)
M4 x 0.70 x 8mm Thumb Screws
each.
REMOVING JAWS
• Loosen (Do Not Remove)
Jaw Thumb Screws
(2 per side)
(FIG 6)
.
• Pull Jaws away from Body and
slide Wire Bail off the Actuating
Bar
(FIG 7)
.
ATTACHING JAWS
• Slide Jaws onto Body with
screw slots located under
Thumb Screws.
• Place Wire Bail over top of
Actuating Bar.
• Tighten Jaw Thumb Screws.
FIG. 6
FIG. 7
