To order parts and supplies: 800.343.9353 >> eastwood.com
5
SET-UP
• Select a clean, level work
surface with clear access to
Handle and sufficient room to
manipulate workpieces through
the Jaws.
• Drill two 3/8” [9.6mm] holes on
a 2-3/4” [69.8mm] centerline
spacing
(Fig 2)
.
NOTE:
A minimum thickness
of 3/16” steel or 3/4” of solid
wood surface is strongly
recommended.
• Use (2) 3/8-16 x 1” bolts (not
included) and washers to secure
base to an optional #20357
Base Plate for vise mounting or
drilled work surface
(Fig 3)
.
FIG. 2
FIG. 3
FIG. 1
The optionally
available Eastwood
#20357 Shrinker
Stretcher Base Plate
(not included) is
strongly suggested
for vice mount-
ing the Shrinker &
Stretcher (Fig 1).
As an alternative,
a sturdy, well an-
chored workbench
with a minimum
3/16” steel or 3/4” of
solid wood surface
is recommended.
✓
Optional
#20357
Base Plate
2-3/4”
Center-to-Center
✓
✓
✓
3/8-16
Thread
