5B6729 – May 1997
5
Overview
Product Description
The
Kodak X-Omat 5000 RA Processor is a general-purpose radiographic processor, which uses a
conventional roller transport system to accommodate both roll and sheet film.
Features of the 5000 RA Processor include microprocessor control, an operator interface, error
detection and indicators, and “smart” replenishment. The 5000 RA Processor also provides 4 operator-
selectable film processing cycles, which run at 4 default transport speeds. The 4 cycles are:
• K/RA
• Rapid
• Standard
• Extended
Each cycle has default parameters or setpoints for transport speed, developer and fixer replenishment
volumes and for developer, fixer, and Dryer temperatures. These default parameters are stored in
memory, but can be modified by the operator. See the table on Page
for these default parameters
and setpoints.
All cycles, except for the K/RA cycle, use standard RP chemicals and film. The K/RA cycle requires
RA chemicals and film.
