Adjustments 21
Adjustments
Carton Height and Width Adjustments
With the power off, place an appropriate size box filled with product in the Case Sealer.
Position the box centered with the rollers, drive belts, and tape heads. Use the filled box
to adjust the width of the side belts and squeezers, and height of the top tape head.
Side Belt Width Adjustment
Use the drive belt width adjustment crank to set the drive belt to the correct width for the
box.
The side belt width adjustment crank can be mounted on either side of the machine by
loosening the set screw, removing the crank, and mounting the crank on the opposite
side of the machine. Re-tighten the set screw to secure the adjustment crank.
Upper Tape Head Height Adjustment
Use the height adjustment crank to set the upper tape head to the correct height for the
box.
Drive Belt Width
Adjustment
Crank
Set Screw
Summary of Contents for SB-2EX
