18 Operation
Center Tape —
Eastey-EX Tape Head only
Make sure the tape is centered
on all the rollers.
There are several rollers in the
tape cartridge where the tape
alignment should be checked to
verify the tape stays on center as
it is being dispensed.
Return the tape cartridge to the
operation position.
Main Spring
For sealing light weight boxes, decrease
the main spring tension. For heavier
boxes, increase the main spring tension.
When setting tension for the rollers,
consider the amount of pressure on the
box flaps required to make the seal.
Cartons completely filled to the top with
product may require more pressure on
top and bottom seams when applying
tape than partially-filled cartons, where
excessive pressure could possibly crush
the carton.
Main
Spring
Summary of Contents for SB-2EX
