Operation 21
Operation
The SB-2 HD Industrial Case Taping System is very simple to operate. Before running
the taper take a minute to double check your installation. Make sure the taper is at the
correct height, is properly aligned with the packaging line and the package height and
width adjustments are correct.
Plug the power cord into a properly wired and grounded receptacle.
Turn on the power switch.
Run a package through the Taper.
To
Reset
Press
Down
On
(Up)
Off
(Down)
Reset
(Press Down
and Release)
Power Switch
Summary of Contents for SB-2 HD
