Troubleshooting 29
Troubleshooting
Problem
POSSIBILITIES
Solution
If machine is not
operating.
The air pressure may not
be sufficient.
Adjust the air
Pressure.
If the air cylinder on the
flap closing system does
not work.
Kinked hoses and/or
wiring.
Reposition the hoses &
wiring.
If the indexing gate
(stopper), doesn’t
operate.
a) Bent or twisted hoses &
wiring.
b) Defective infeed or exit
photo eyes sensors.
(a) Re-position hoses &
wiring.
(b) Adjust the position of
photo eye, or replace
a new one.
If the machine cannot
tape cartons.
The side belts are not
correctly adjusted for the
box size.
Use the width adjustment
crank to adjust the side
belt width.
Start Button Indicators
START button flashes 1
time.
Normal operation.
START button flashes 2
times.
The motor is overloaded.
START button flashes 3
times.
STOP button is on or
wiring may be
discounted. Check
wiring.
START button does not
flash.
(a) Turn on the power,
power indication light
will be on.
(b) Release the E-STOP.
Summary of Contents for SB-2 EX-Auto
